Carolina E-Cigs carries a variety of RDAs (rebuildable dripping atomizers) and RBAs (rebuildable atomizers). Shop online or stop by one of our Charlotte area locations to get help in selecting the best rebuildable atomizer for your setup!

Don't forget to load up on wire and cotton before you check out!


  1. Doge V2 RDA

    The Doge V2 is an elegant, high performance rebuildable atomizer. It comes with air injection to cool vapor and increase expansion inside the tip. The competition tip is shortened to 14mm to provide a sleek look. The adjustable barrel has 11mm and 2.5mm air intake slots. The juice well is measured at 1mm to lessen chances of dry hits. With extra replacement parts and m3 screws in copper and stainless steel, you can customize the Doge V2 according to your preferences.

    Learn More

  2. Freakshow RDA

    The Freakshow RDA by WOTOFO is an affordable rebuilable drip atomizer with bottom air flow control generating massive, flavorful clouds. The Freakshow features a 22mm three-piece design with triple o-rings on the deck and heatsink fins on the topcap. Three posts sit in a deep juice well, giving the Freakshow the ability to accept single or dual coil builds.

    Learn More

  3. Helios RDA

    The Helios RDA is a simple dripping atomizer made for dual coil builds. Constructed of stainless steel, this RDA is solid and durable. Each side of the top cap has 2 airflow holes that can be adjusted by turning the ring on the outside. The coil is mounted high enough above the building deck that you can use more wick than usual, so you don't have to drip as often.

    Learn More

    Regular Price: $20.00

    Special Price: $18.00

  4. Kaos RDA

    The Kaos RDA by ISM can handle any build you throw at it! The Kaos features a 24mm design with a large juice well and massive airflow. PEEK insulation helps the KAOS take hotter builds in stride, and a copper pin guarantees you're getting the best connection possible!

    Learn More

  5. Legend RDA

    The Legend RDA by HCigar, is stainless steel construction with a triple post setup. The big post holes allows thicker gauge wires, slightly over-sized Phillips screws provides easy tightening, and the center post is maintained by a high heat insulator. The deep well helps absorb an ample amount of liquid when doing dual or quad configurations, and the 510 connection is fitted with copper plated contacts. The center shield and top cap are removable and serves as adjustable air flow for different draw in vapor production.

    Learn More

    Regular Price: $25.00

    Special Price: $20.00